HASS CNC CONTROL

SWING: 23", MAXIMUM MACHINING DIA.: 10.3"

CENTER DISTANCE: 24" MAX. CUTTING LENGTH: 20"

BAR CAPACITY: 2.0"

20 HP, 4,000 RPM

TRAVELS:

X: 8.45"

Z: 20"

EQUIPPED WITH:

CHIP CONVEYOR, COLLET CHUCK, SERVO 300 BAR LOADER

TOOL SETTER, PARTS CATCHER, 10 STATION TURRET 

FANUC 18 iTB CNC CONTROL

TWIN SPINDLE

13.8" SWING, 7.87" MAX. CUTTING LENGTH, 15.76" BETWEEN SPINDLES, SPINDLE MOTORS 25 HP EA., 4,500 RPM

2 X 8" 3 JAW HYDRAULIC CHUCKS

X AXIS TRAVEL 6.89", Z AXIS TRAVEL 8.27"

2 - V10 TURRETS

3 AXIS SINGLE ARM GANTRY LOADER WITH TURN OVER STATION

16 STATION RIGHT SIDE ROTARY STACKER UNIT

CONTROL: OSP200L

SWING OVER SADDLE: 15.75"

DISTANCE BETWEEN SPINDLES: 37.80"

MAXIMUM TURNING DIAMETER: 8.27"

MAXIMUM MACHINING LENGTH: 21.26"

SPINDLE NOSE (MAIN/SUB): A2-6

BAR CAPACITY: 2.65"

POWER: 15HP - 6,000 RPM EA. SPINDLE

TURRETS(L & R): 12 STATION TURNING OR ROTARY

POWER TOOLS: 5.4HP - 6,000 RPM

TRAVELS:

XA & XB: 7.56"

ZA & ZB: 27.56"

C AXIS: .001 DEGREE

Y AXIS: +1.65" / -1.97"

TURBO 5-55 BAR FEEDER 

EQUIPPED WITH:

CHIP CONVEYOR, PARTS CATCHER, COLLET CHUCK MAIN & SUB,

CHIP BLASTER COOLANT SYSTEM, TOUCH SETTERS BOTH SPINDLES

TRANSFORMER, SPARE M CODES 4 SET 

FANUC 18TB CNC CONTROL

MAX. TURNING DIAMETER: 12.2"

DISTANCE BETWEEN CENTERS: 16.1" 

MAX. TURNING LENGTH: 9.1"

SPINDLES: 2 X 25 HP - 3,500 RPM, A2-8 NOSE, 2.52" BAR CAPACITY

LOADER TRAVELS: 165" X 35.4" X 7.87"

                         MAX PART WEIGHT 22LB 

                         PART SIZE: 8.7" X 4"

EQUPPED WITH:

STOCKER TABLE

CHIP CONVEYOR

NO CHUCKS AVAILABLE, 12" STANDARD 

FANUC 18T

2-6" CHUCKS 

MAXIMUM CUTTING DIAMETER X LENGTH: 9.84" X 6.1"

13.78" BETWEEN SPINDLES

SPINDLE MOTORS: 2 @ 10HP, 6,000 RPM EA.

TURRETS: 2 @ 8 STATIONS EA.

CHIP CONVEYOR

NO STOCKER 

FANUC 18 IT

MAXIMUM TURNING DIAMETER: 7.88"

MAXIMUM SWING: 10.244"

TURNING LENGTH: 4.7"

MAIN MOTOR: 28 HP - 4,500 RPM

12 STATION TURRET STANDARD OR ROTARY

ROTARY TOOLING (3): 16 HP - 6,000 RPM

CHIP CONVEYOR 

24 " 3 JAW POWER CHUCKS

31.5"MAX SWING

30HP MOTORS WITH/OR WITHOUT 4 TO 1 RATIO

GEAR BOX FOR HIGH TORQUE AT LOW SPEED 0 TO 500 RPM

STANDARD SPEED RANGE 15 TO 1500 RPM 

DISTANCE CENTER LINE 32.28"

MAX TURNING DIA.

MAX TURNING HEIGHT 15.8"

X-TRAVEL,11.8

Y-TRAVEL,21.26

(2)- 12 STATION TURRET

CHIP CONVEYOR

 COOLANT PUMP AND TANK

EQUIPTED WITH FANUC 0TT-CNC CONTROL 

FANUC 18-iTB

TWIN OPPOSED SPINDLES:

8.25" CHUCKS & COLLET CHUCKS 

29.5 HP - 5,000 RPM

MAXIMUM BAR CAPACITY 2.55"

TURNING DIAMETER NOMINAL 8.0" MAXIMUM 21.7"

TURNING LENGTH: 40.2"

UPPER SPINDLE: 10,000 RPM W/ 24 POSITION TOOL CHANGER, CAPTO C6

LOWER TURRET 12 STATION MILL/DRILL 4,000 RPM 

SEVERAL USED AND UNUSED TOOL HOLDERS

TRAVELS:

X1/X2: 21.9"/7.5" - 944 IPM TRAVERSE RATE

Z1/Z2: 43.1"/44.9" - 944 IPM TRAVERSE RATE

C1/C2: 360.00 DEGREE - 200 RPM

Y1: 6.3" 630 IPM

B1: 240 DEGREE 200 RPM

A1: 41.9" 944 IPM

MACHINE WEIGHT: 26,455#

EQUIPPED WITH LNS QUICK LOAD SERVO BAR FEED S3 MAGIZINE BER FEED 

CONTROL: OSP P200L

SPINDLE:

30 HP - 3,000 RPM

A2-11 SPINDLE NOSE - 4.33" BORE

TURNING DIAMETER: 12" NOMINAL/ 16.5" MAXIMUM

12" CHUCK 3 JAW HYDRAULIC

CENTERS: 25.59"

12 STATION TURRET

TURBO VARIABLE SPEED CHIP CONVEYOR