CATEGORIES

Warner & Swasey 5A Sq. Head Turret Lathe

GENERAL SPECIFICATIONS

Swing Over Carriage Horn: 32-3/4"
Swing Over Carriage Wing: 36-1/2"
Spindle Bore: 9-1/2"
Spindle Nose: A1-20"
Spindle Speeds: 10 - 281 RPM
CROSS SLIDE
 Cross Travel: 21"
 Cross Feeds: (16) .003" - .103"
 Power Rapid Traverse: 6-3/4 FPM
 Longitudinal Travel: 91-9/16"
 Longitudinal Feeds: (16) .005" - .167"
 Power Rapid Traverse: 15-1/2 FPM
HEXAGON TURRET
 Longitudinal Travel: 91-9/16"
 Longitudinal Feeds: (16) .005" - .167"
 Power Rapid Traverse: 36-1/4 FPM
 Size Across Flats: 20-1/4"
 Diameter Of Tool Holes: 6-1/4"
 Maximum Distance, End Of Spindle To Turret Face: 104-3/16"
 Length Turned: 83-5/8"

EQUIPPED WITH

75/37-1/2 HP Two Speed Motor, 440/60/3
32" 3-Jaw Chuck
Rapid Traverse
Miscellaneous Tooling For Turret

Approximate Weight: 25,000 Lbs.

F.O.B. Cincinnati, Ohi
o


LANSING ENGINE LATHE 41" X 320"

LANSING ENGINE LATHE MODEL G , MADE IN ITALY
 
S/N 5672
41" SWING X 320" CENTERS
52 1/2 " SWIND IN 20" GAP
4 1/2" SPINDLE BORER
D1-11 CAM LOCK SPINDLE NOSE
16- SPEEDS  10- 576 RPM
30 HP. MAIN MOTOR
4 WAY RAPID TRAVERS CONTROL HANDLE
ELECTRIC SPINDLE BRAKE
31 1/4"  4-JAW CHUCK
1- 24" & 1- 10" ROLLER STEADY RESTS
COOLANT SYSTEM 1- PUMP  5- CHIP PANS
 
INCH  &  METRIC THREADING
TAILSTOCK  #6 MORSE TAPER
HARDEN BED WAYS, 24 1/4" WIDE 
4 WAY TOOL POST